Friday, July 19, 2013

Our engineers do it again!

It is exciting when new technology takes a foothold in our industry.  The garment decorating business has been changed in the last 10 years by the strong emergence of the direct-to-garment digital printing.  This technology is presenting new challenges to the shop floor.  What makes this so exciting is that our engineers are presented with the challenge of creating something new to solve problems.

They don't get to do that very often in the garment decorating business.

So what is so different?

The requirements of the digital printing world are similar to the ones demanded by discharge printing and water-based printing.  These technologies have been around for years but, until recently, they have not been major factors on the production floor.

With the expansion of digital printing as serious production machines, the needs of the high-volume shop have shifted.  This is where the learning begins.  Our engineers have had to file away all of their knowledge of curing plastisol inks and delve into the problems associated with water-based curing.

Problems, you say?  No.  Challenges are a better definition.  Or maybe, in engineer speak, new parameters such as:

  • longer cure times
  • wet garments that are hard to get to temperature
  • scorching issues of 100% cotton
  • shrinking of 100% cotton
  • water vapor evacuation.

This is where engineering gets fun.  At least that is what they tell me.

Solutions?

So the crack engineers at Brown started with the UltraSierra2 X-series ovens and started testing.  First, they added the TRX software for more control.  Very cool.  So we now have TRX curing systems but they did not resolve all the problems for the specialty garment decorator.  
TRX-3611


More air was essential. The DragonAir Core Technology was developed. The team added additional air flowing in the unit over the heaters.  This was great.  Better results, more production.  But still not right.
DragonAir Core Technology original
DragonAir Talon


The air was not staying hot enough and it was exiting the chamber with the water vapor.  Not very efficient.  The the Core Technology was enhanced with recirculation air and filters to keep the air clean.
DragonAir Core Technology latest revision

Ok, we were almost there.  But the production rate was still below our expectations.  These units have to cure large volumes of shirts for the discharge and digital people to see any improvement on the production floor.  The shirts were taking too long in the chamber.  Why, you ask?  Because they are so wet when they are placed on the belt that they can't get up to temperature fast enough.  And they cooled the chamber, so the heaters were working too hard.  Answer?  A heat bump.  More Power.

Final result?

Brown Manufacturing Group, Inc. has employed top notch engineers since they began.  Our people are known for producing curing systems that rate as some of the best in the world.  They are reliable, consistent and they do what we say they will do.  And this is no exception.  The DragonAir line of curing systems will cure digitally printed shirts, water-based printed shirts and discharge printed shirts at a serious production rate with solid results.  
DragonAir Griffin


And what else?

After messing around with our new toys, we discovered the other applications that it is a perfect fit for.  Specialty printing of plastisols.  With the ability to recirculation and filter air, cause a rapid bump in the garment temp, and have precise controls using TRX software the DragonAir is the answer to plastisol printing issues.  Think of how these features would apply to polyester garments that have dye migration.  What about foil and reflective inks or high-density and puff?  We see applications for this curing unit throughout the garment decorating business.

So we are excited.

Our engineers are almost giddy with the fun of developing a new product line.  Our sales people are telling anyone and everyone about the DragonAir.  They even created a division just for digital and specialty printing.  BrownDigital.

What size is right for your shop?  Call us.  We will figure out that problem as well.

Check out www.brownmfgdigital.com for more details.

Tuesday, June 4, 2013

Production solutions, for all print shops.


Brown Manufacturing Group, Inc. offers a wide array of products to increase production and profits for many types of screen printing shops.  For production solutions in printing, curing, athletic numbering or screen processing, we have it.

Ok, so how is this a blog and not a sales pitch?  Good question.  


It starts by asking the reader what area of their shop is a drain on production and not helping the bottom line.  That is a review all business owners and print shop managers need to ask themselves.  Typically, everyone gets wrapped up in the daily concerns of getting goods out the door and collecting money.  We don't take the time to look at the process and see what needs help.

OK, how do we do that?

Start by taking a step back from your daily operations and critically looking at your bottom line.  Ask some questions.

  1. Where are your costs higher than you expect?  
  2. Where are the bottle necks in the operation?
  3. What areas are requiring maintenance?
  4. What are your sales people asking for?
When you have looked at these and come up with a list of items to address, the analysis begins.  You remember Business 101?   Well, this is textbook stuff.  If any of these areas have red flags, you need to look at alternatives.

Business 101 refresher.

  • If your curing system is unreliable, get a new one.  Down time is expensive.
  • If your curing system is not fast enough, get a new one.  Really, I had to tell you that?
  • If you are thinking you need to hire more people to get the work out, don't.  Get an automatic.  It shows up everyday and can do the work of 40 hours manual printing in about 6 hours.
  • If your auto printing machines won't hold registration, call in a tech and get them fixed.  If you can't count on the machine, you won't make money.
  • If your manual printing machine won't hold register, do some much needed maintenance.  Really, there isn't much to these machines but they don't work if you don't take care of them.
  • Is your screen department too slow?  Fix it.
  • Is your sales staff telling you that they have solid customers for new products?  Listen to them!  These are the people who get you orders!
What is so amazing about Business 101 is that is applies to home-based businesses and large production houses in the same way.  The questions are the same, the solutions are the same.  Only the size and price tag changes.

Take a look at the options from Brown Manufacturing Group, Inc.




When you are finished with your homework, call us for some suggestions of what will help increase your production and your bottom line.

Wednesday, March 20, 2013

Curing solutions for Direct-To-Garment tshirts

The direct-to-garment (DTG) industry is a fast growing segment of the t-shirt decorating businesses.  It has potential to for great customer service and satisfaction due to the rapid turn around of finished goods and the limitless design possibilities.  However, it has some downsides in terms of profits.

We have written in previous blogs that the only way to make high profits in t-shirt decorating is to move product in and out of the production facility as quick as possible.  Labor costs are the real costs of t-shirt printing.  Whether you are talking traditional screen print or DTG.  Keeping your time down is how to keep your profits up.

What is the biggest time consumer in DTG production?  Curing.  Especially curing dark garments.  Let's talk about that production and a new way to resolve the bottle neck.

Typical production of DTG shirts
There are standard steps necessary to produce prints on dark colored garments.

  1. spray the shirt with pre-treat solution
  2. using a paper barrier, press the shirt in a transfer press to seal the fibers and dry the pre-treat
  3. print the shirt
  4. use a transfer machine (set to not touch) to cure the ink
What are we trying to accomplish?
The first press with the transfer machine lays down the fibers of the shirt so that the ink prints onto a flat surface.  This is necessary to get a clean print.  The second press is our curing system.  This can be accomplished in other ways that are faster and more efficient for both the operator and shop power consumption.  The traditional heat press ranges from 45-90 seconds pr/shirt for a full cure which is roughly 60 shirts per/hr.  With DTG machines capable of producing up to 400 per hour, an operator would need to utilize around 7 heat presses.  A single operator will not be able to keep up at that pace, and the power consumption of is crazy. 

What is the solution?  
A conveyor curing system that heats the water and has convection air to move the water vapor out of the chamber.  DragonAir Core Technology.  Ok, nice sales tag.  But seriously, this is the answer to increasing production and getting a consistent final product.  If you can pull the shirt from the printer and place it on a conveyor, then you open the transfer press for other uses and the operator has one less task.  Also, in a conveyor system, you can load from multiple DTG printers so that you would reduce the power required for the transfer presses.

So how and why does this work?
DragonAir Core Recirculation Technology

Think of convection ovens.  The idea is to move heated air around the product and to exhaust the water vapor out of the system.  The DragonAir does just that.  By utilizing filtered air and digital temperature control this unit effectively and consistently cures DTG garments.  




The final garment has a more vibrant look and it feels better.  The cure is consistent from shirt to shirt and the cost of production has dropped.  And isn't that what we are going for?  Production cost of goods to decrease, production to increase, and a great looking product.  

For more information, check out our BrownDigital web site at www.brownmfgdigital.com.








Tuesday, January 22, 2013

Show season kicks off!


new for 2013


This past week, Brown Manufacturing Group has launched the 2013 trade show season with two great events.  The PPAI show was held in Las Vegas and we were proud to be members of the decorating pavilion. The Imprinted Sportswear Show is closing today in Long Beach and we have shown at this event since it began decades ago.

What makes these so special?
The PPAI show gives us a different side of our customer base than the other events that we exhibit at.  We get to see large decorators and manufacturers of unique items sold in the promotion world.  Many of our athletic jersey customers also exhibit at this show and visit our booth to see what's new.  Also, we get to solve unique problems that come up in this side of the printing world.  That kind is customer service is just fun.

The ISS show is big and bustling with garment decorators, our prime market.  This year the atmosphere and attitude of the customers attending has been more upbeat than the past few years.  We think that is a sign of an economy on the upswing.  California has suffered from this recession and this show has been a representation of that.  However, good things are coming.

What good things are coming?
Brown uses the ISS Long Beach event to introduce new products and ideas.  The customer base is receptive and it is a great way to start a new year.

New at is show is the TRX Series conveyor oven.  This includes the TRXi software that is amazing.  With this software, operators have complete control of the parameters of the dryer using a touch screen display. Cool, but what is really amazing is that these parameters can be saved for future reuse.  Up to 36 different jobs can be stored.  This software can also analyze the cost to run the job and the lifetime running cost of the machine.  There are more features to list, so check out the web site.

Also new at this event is Brown Manufacturing Group's new product division, BrownDigital.  This division displayed the new DragonAir line of curing units for direct-to-garment printers,  I know, about time someone made these!  These units offer air flow and convection heat through DragonAir Core Technology.  Go to the web site and check it out.


Another new product is the LazerLoad feature for the NumberPrinter line of athletic numbering machines.  This feature gives the press operator adjustable laser alignment lights to mark single digit and teen digit shirt placement.  A time saver for any athletic numbering shop.




Innovation is the key.
These hard economic time have been a struggle for many of our customers and competitors.  We have dealt with this in our usual style, by developing the products that solve problems and supply necessary tools.  By advancing our product line forward we have sustained our customer interest and grown during these past years.  Development of innovative and creative tools has been the benchmark of Brown's success.

Please take a moment and check out the new items.  We think you will be curious on how these can help you.

Friday, September 28, 2012

TRX Series Conveyor Oven Introduction

touch screen controlled curing system

Brown Manufacturing Group, Inc. introduces a new series of conveyor curing systems.  The TRX Series ovens offer the reliability and durability you expect from Brown brand dryers and the highest level of control package ever offered on an oven in the screen printing industry.  For the print shops who drive a high level of production and are attempting to get control of the shop rate and costs, this is a tool to have.

So what, exactly, does this thing do that is new and different?

While the TRX offers the same temperature accuracy of our Sierra and
UltraSierra2 lines of machines, this line also has the ability to program dryer settings and store them for future use.  Up to 36 different programs can be stored using a touch sensitive screen.  This means that when an operator changes garment types, he selects a predetermined set of parameters by pushing a button.  No more guessing what temperature and belt speed to run.

A few more features include:

  • Scheduled maintenance programs with alarms.
  • Industrial stack light with alarm notification.
  • Onboard diagnostics with alarm.
  • Eco Mode for low power usage during operator down time.
  • Auto shut-down mode.
  • Cost analysis per job and per piece.
  • Cost analysis for the life of the machine.
  • Time/Temperature/cost range analysis per job.
  • Password protection.
  • Overhead display of current temperature.
  • So much more....



So why the excitement?

Every shop has to keep track of production settings for the different type of garments.  In small shops, this information is usually in the operators head.  Not a good idea.  In larger shops, this is documented and the operator has to look up the settings and manually change the dryer to match.  With the TRX, just enter the parameters in one time and save them.  When the operator needs that again, touch a button.

Additionally, for production managers, the overhead display is visible from anywhere on the production floor.  The Stack Light gives visible alarms that can be viewed from anywhere on the production floor.  The running screen reads what program is activated and its preset requirements.  Wow, a lot of really useful tools.

On top of all that.... it tells you when it is broken, what needs to be maintained and how much it and your jobs are costing you.  Man, I wish all my shop tools could be that specific.

For more information.

This dryer is on our web site www.brownmfg.net and, it is so cool, it gets to have its own.  www.trx-touch-screen-conveyor-dryer.com

Unleash this monster in your shop, today.




Friday, March 9, 2012

Show specials. Are they really special?


So, did this pricing catch your attention?

That is one of the ponderings that exhibitor sales people and trade show directors discuss.  The Show companies want the exhibitors to provide special pricing at their event.  This gives everyone something to talk about and provides a reason for an attendee to make the trip.  

We have tried many different specials over our 30 years of trade show experience.  We have offered free freight, extra add-ons at no charge, deep discounts and free on-sight training.  (ok, maybe that last one wasn't a good sell.  Who wants us in their building?)  

This latest round of specials has gotten some attention.  Partly because the world is getting better at e-business and this has been viewed by many people who are on our e-mail list.

This is the question for our readers and customers.  Does a show special excite you enough to get you to attend an event?  If it does not, then what would?  

The argument is that there are too many conventions.  However, we meet new people at these events every time.  We get to introduce existing customers to new products each time we see them.  If this happens each time, then how can there be too many.

Ok, so now I am ranting.  

Take a look at the special and tell us what you think.  Or better yet, visit us at a show near you.  We are at them all.

Thursday, January 26, 2012

Custom built machinery

Custom built machinery.


Did you know that Brown Manufacturing Group makes custom equipment? For over 30 years we have designed and built machinery for some very interesting processes.  






This unit, still in its final assembly, is for a customer with very tight space requirements.  They are in a very narrow shop and need a dryer to accommodate high production.  


We have also designed machines for curing skis, nail polish bottles, mirrors, casino gaming machines and auto glass.  Our printers have been modified to print everything from umbrellas to folding chairs.  


These projects put a bit of spice into the engineering department.


Do you have any printing projects that need a better solution?  Call us and lets see how Brown can help.